Retro Push-Fit Tee
Product Code: APT1105
Using this adapter with our Floë Water Drainage System (sold separately), you can ensure your Motorhome is perfectly drained down.
Used with our patented Floë device, this adapter can be connected on the cold water line inside the motorhome.
With the help of a foot pump or 12/240 volt tyre compressor you will be able to purge water to prevent frozen lines, pumps and taps etc in winter. As it takes no time at all to use, you can also use the kit to clear lines of older stagnant water preventing the possibility of disease such as Legionnaires and have fresh drinking water every time you use your motorhome. A must have for every motorhome enthusiast.
To fit motorhomes with hose filler cap or vented on-board water tanks. This should be used in conjunction with our Inline Retro Push-Fit Shut-Off Valve (APT1106).
The part is suitable for 12mm semi rigid water pipe, which is simply push fitted into the part. Should your leisure vehicle be using a flexible braided garden type hosing popular with European and some UK manufacturers, then you will need to use our continental kit APT1114 for hoses of an outside diameter of 13-15mm and APT1115 for hoses with an outside diameter of 15-17mm.
To find out more on how to drain down your property, please see our motorhome demonstration on our products page and technical support videos on our support page.
ATTENTION – Please do not pressurise system to more than 15PSI and always read instructions thoroughly before use
£19.99
9 Month Money Back Warranty
Simple Returns Procedure
Extended Warranties
Reduced Insurance PremiumsIf Buying This Kit, You May Need This Part To Go With It
Replacement Floe for Touring Combos
Used with our patented Floë Touring Combos (sold separately), this product connects to the branded water connectors for insertion into the side of the touring caravans.
Replacement Truma Non Return Valve
Used with our patented Floë Induratec 636 (sold separately), this Non Return Valve fits to the incoming wter supply, either next to the input from the wall, or beside the on-board cold water tank. This ensures that the air does not escape through to the outside or through the vent in the tank. The Truma […]
Continental Kit
For use with pipe sizes of 10mm inside diameter and 13mm outside diameter or 13mm inside diameter and 15mm outside diameter. For optional use with our Floë Caravan and Camper Drainage Kit APT0105 and our Floe Induratec 636 (sold separately). Most continental and some UK made motorhomes and caravans will have a braided hose water system. […]
15mm Reducing Kit
Floë comes with a 15mm tee, to fit to typical domestic 15mm copper or plastic water pipes. Sometimes sites use alcathene pipes which are larger in size. This reducer kit will enable the owner to be able to reduce the pipe size to 15mm in order to fit Floë.
Reviews
There are no reviews yet.